Installation and maintenance
General installation and maintenance documents that are not tied to a single model: ESD prevention, replacing components and firmware. Each document shows which models it applies to.
- Preventing Electrostatic Discharge (ESD) Damage (TechMemo 00-0005) General TechMemo on preventing electrostatic discharge (ESD) damage when working on Adaptive displays: grounding, wrist straps and correct handling procedures for static-sensitive components. Applies to all models. View manual Download PDF
- Changing the firmware EPROM in ALPHA signs Technical guide for replacing the firmware EPROM in ALPHA signs (with and without the Smart Alec option): locating the EPROM, removing it and correctly fitting the new one. Applies to the ALPHA models listed below. View manual Download PDF
- Replacing Board Level Components on Outdoor Signs (Service Bulletin 07-0001) Service Bulletin on safely replacing board level components in outdoor LED displays: do not hot-swap, disconnect power first and follow the procedure. Applies to AlphaEclipse 3600, Excite, RoadStar and StreetSmart. View manual Download PDF