LED displays
Calculating viewing distance: character height, speed and time
‘How big must the screen be?’ is the wrong question. The right question is: how far must it be legible? That depends on the character height, the viewer’s speed and the time they need to read.
The further away you stand, the larger the letters must be to still be able to read them. Logical, isn’t it?
With a sign along the road, something extra counts: the driver is moving and has only a moment to read. The faster they drive, the earlier (and therefore the further away) they must be able to read the sign. That is why we choose the letter size based on the distance and the speed.
Not the size of the sign, but the distance over which it must be legible, is the meaningful question. Three concepts help with this.
Legibility Index (LI) = the legible distance per unit of character height, in feet per inch (ft/in). The old ‘gold standard’ was LI = 50 (based on 20/20 vision). Because of an ageing population, LI = 30 is now recommended (based on 20/40 vision). At LI = 30, a letter of 25 cm (10 inches) is legible up to about 90 m (300 ft).
MRLD and DSD
MRLD (Maximum/Minimum Required Legibility Distance) is the distance over which a sign must be legible and comprehensible. It follows from the driving speed multiplied by the DSD (Decision Sight Distance): the time needed to read the message, understand it and react to it. For signs with 5 or fewer critical items, 5.5 seconds is often used. A sign with letters of 28 cm (11 inches) is, at LI = 30, legible up to ~100 m (330 ft); a driver at 40 mph (≈ 18 m/s) needs ~98 m (323 ft).
Selection table by speed (LI = 30)
| Speed (mph) | ft/s | Required MRLD (ft) | Character height (inches) |
|---|---|---|---|
| 75 | 110 | 605 | 20 |
| 70 | 103 | 565 | 19 |
| 65 | 95 | 524 | 17 |
| 60 | 88 | 484 | 16 |
| 55 | 81 | 444 | 15 |
| 50 | 73 | 403 | 13 |
| 45 | 66 | 363 | 12 |
| 40 | 59 | 323 | 11 |
| 35 | 51 | 282 | 9 |
| 30 | 44 | 242 | 8 |
| 25 | 37 | 202 | 7 |
Source: derived at Legibility Index = 30 and DSD = 5.5 s (Adaptive 2004, based on USSC/FHWA research).
The legible distance is LI × character height. LI = 30 ft/in means that 1 inch of character height is legible up to 30 ft; in metric terms this comes to about 3.6 m of reading distance per cm of character height (LI = 50 ≈ 6 m/cm). The recommendation LI = 30 corrects for 20/40 vision in an ageing population; LI = 50 applied to 20/20.
MRLD from speed and DSD
MRLD = driving speed × DSD. Example: 40 mph = 59 ft/s; with DSD = 5.5 s → MRLD = 59 × 5.5 ≈ 323 ft (≈ 98 m).
DSD is highly variable: it depends on the number of messages and their complexity. The benchmark of 5.5 s applies to signs with at most 5 critical items. The required character height then follows from MRLD / LI.
Placement zone (lateral offset)
Because the cone of vision consists of two right-angled triangles, the maximum lateral placement distance follows from the tangent of the half-cone angle over the viewing distance. Thus each row in the table also has a lateral-offset range (e.g. at 40 mph ≈ 0–28 ft). Character height (legibility) and placement (detection) must be optimised together for maximum visibility.