LED displays
AlphaEclipse outdoor signs: anatomy and readability
An AlphaEclipse outdoor sign is built from a grid of LED pixels. Using the original Adaptive diagrams, this article shows how a pixel is made up, which character size you need for a given viewing or driving distance, and why LED signs are more readable both day and night.
An LED sign is more readable, both day and night, than incandescents, and the LEDs last far longer. The image is built from small points of light called pixels. The closer the pixels sit together, the sharper the image.
Individual LED lamps are grouped into clusters on a circuit board, and each cluster is called a “pixel”. The pitch is the distance between each LED pixel: the smaller the pitch, the finer the image. Below you can see what this looks like for each AlphaEclipse model.




The further people are from the sign, the larger the characters have to be. A handy rule of thumb: every 1 cm of character height equals roughly 5 metres of viewing distance. For a busy intersection or a motorway you therefore need much larger characters than for a shopping street.
Pixel, pitch and the make-up of an LED lamp
A pixel is a cluster of LED lamps on a circuit board. Light is created by a tiny LED chip (or “die”) and reflected up into the lens by a metal reflector. The pitch = the distance between each LED pixel, and helps determine both the sharpness and the minimum viewing distance.
The four AlphaEclipse outdoor series differ in pixel make-up and pitch:




Character size and viewing distance
Character size is expressed in pixels (e.g. “7-high” or “16-high”): more pixels per character gives larger characters that are legible from further away. Adaptive uses the rule of thumb character size / pixel pitch — 1 inch = 40 feet of visibility — in metric units roughly 1 cm ≈ 5 m.
For traffic applications the speed matters too: the driver’s cone of vision is about 20 degrees. The table below gives a guide value for the character height per speed:
| Speed | Viewing distance (max) | Recommended character height |
|---|---|---|
| 120 km/h | ± 595 m | 915 – 1220 mm |
| 105 km/h | ± 440 m | 610 – 915 mm |
| 90 km/h | ± 290 m | 455 – 610 mm |
| 70 km/h | ± 230 m | 305 – 455 mm |
| 55 km/h | ± 135 m | 150 – 305 mm |
| 40 km/h | ± 100 m | 100 – 205 mm |
See calculating viewing distance and pixel pitch and legibility for the full rules of thumb.
Why LED reads better than incandescent
- Readability: LED signs are more readable, both day and night, than incandescents (U.S. Department of Transportation, 1998 study).
- Lifespan: LEDs last far longer than incandescent lights. With the AlphaEclipse sign, after 100,000 hours (over 11 years) of continuous use we can be 98.33% certain that all the sign’s LEDs will still be working.
- Power: a pixel on an AlphaEclipse sign uses only 40% as much power as a comparable incandescent bulb.
Pixel make-up and pitch per model
| Model | LED lamps per pixel | Pitch |
|---|---|---|
| AlphaEclipse RoadStar | 4–12 (depending on size and colour) | 63,5 / 88,9 mm |
| AlphaEclipse 3600 | 3 (red/amber) or 5 (RGB) | 35 mm (lens 22,9 mm) |
| AlphaEclipse 3500 | 4 | 34,8 mm (lens 19 mm) |
| AlphaEclipse 2600 | 1 | 15,2 mm |
| AlphaEclipse 2500 | 1 | 11,4 mm |
The pitch determines how fine the image is; the pixel make-up differs per series (see the diagrams):




Character sizes per model
The number of pixels in the sign height determines both the number of text lines and the maximum character height. The values below are the actual character heights (rounded, in mm):
| Model | Sign height | Typical character height | Largest character height (1 line) |
|---|---|---|---|
| RoadStar (63,5 / 88,9 mm) | 7 pixels | 413 / 582 mm (7-high, 1 line) | 413 / 582 mm (7-high) |
| 16 pixels | 413 / 582 mm (7-high, 2 lines) | 984 / 1382 mm (16-high) | |
| 3600 (35 mm) | 16 pixels | 233 mm (7-high, 2 lines) | 549 mm (16-high) |
| 32 pixels | 233 mm (7-high, 4 lines) | 1109 mm (32-high) | |
| 48–128 pixels | 233 mm (7-high, 6+ lines) | 1039 mm (30-high) | |
| 3500 (34,8 mm) | 8 pixels | 264 mm (8-high, 1 line) | 264 mm (8-high) |
| 16 pixels | 228 mm (7-high, 2 lines) | 543 mm (16-high) | |
| 24 pixels | 228 mm (7-high, 3 lines) | 819 mm (24-high) | |
| 32 pixels | 228 mm (7-high, 4 lines) | 1098 mm (32-high) | |
| 2600 (15,2 mm) | 16 pixels | 91 mm (7-high, 2 lines) | 229 mm (16-high) |
| 32 pixels | 91 mm (7-high, 4 lines) | 472 mm (32-high) | |
| 48–80 pixels | 91 mm (7-high, 6+ lines) | 442 mm (30-high) | |
| 2500 (11,4 mm) | 16 pixels | 69 mm (7-high, 2 lines) | 171 mm (16-high) |
| 32 pixels | 69 mm (7-high, 4 lines) | 354 mm (32-high) | |
| 48–80 pixels | 69 mm (7-high, 6+ lines) | 331 mm (30-high) |
How to select an AlphaEclipse sign
AlphaEclipse sign selection criteria include:
- Character size / pixel pitch — 1 inch = 40 feet of visibility (± 1 cm ≈ 5 m).
- Sign face angles — optimum viewing may require the face of the sign to be angled.
- LED viewability / visibility — the viewing angle for both faces of the sign.
- Brightness / contrast / night-time dimming — automatic or scheduled dim times and percentages.
- Maximum and minimum viewing distance — determines character size, length of sign and viewing times.
- Lateral offset — the greater the lateral offset, the greater the face angle required for maximum viewing distance.
While an electronic sign could display an endless stream of messages, it is highly desirable to have an entire message displayed in as short a time as possible — basically, longer messages = a longer sign. For the exact “maximum characters per line” per configuration and the full character sizes, see the AlphaEclipse Readability Fact Sheet and the datasheet per model.