Light
Wavelength and frequency: how light gets its colour
Colour is no accident: every colour of light belongs to a specific wavelength. That explains why we can describe an LED colour precisely in nanometres, and why our eye perceives one colour as much brighter than another.
Light moves in little waves, a bit like waves on water. In some waves the crests lie far apart, in others close together.
The distance between two crests is called the wavelength. And that wavelength determines the colour! Red light has longer waves, blue light has shorter waves. That is how your eye knows which colour it sees.
Funnily enough, our eye sees yellow-green light best of all. That is why yellow and green stand out especially well, even from a distance.
Because light behaves as a wave, we can measure two things: the wavelength (the distance between two wave crests) and the frequency (the number of waves passing a point per second). The two are inversely proportional: the higher the frequency, the shorter the wavelength, and vice versa.
Wavelength describes colour precisely
We usually say ‘red’, ‘green’ or ‘blue’, but in the LED world a more precise language is needed. For that we use the wavelength in nanometres (nm). The red LEDs used in outdoor screens, for instance, lie around 625 nm. The human eye sees wavelengths between roughly 400 and 700 nm.
Not every colour appears equally bright
In a well-lit environment the eye is most sensitive to light around 555 nm (yellow-green), and far less sensitive to deep red and blue. For equal energy, yellow-green light therefore looks brighter. That is exactly why hi-vis clothing and many warning screens are yellow-green, and why it plays a part in the design of a legible screen.
For electromagnetic radiation, c = λ·ν, with c the speed of light. Wavelength and frequency are therefore each other’s inverse at constant c. For visible light, wavelength (nm) is the usual description; the dominant wavelength determines the perceived hue. Colour perception itself, however, depends on more than wavelength alone: hue, saturation and brightness all come into play.
The eye sensitivity V(λ)
The spectral sensitivity of the eye in daylight is described by the photopic luminosity function V(λ), peaking at 555 nm. This function forms the bridge between radiometry (physical energy) and photometry (perceived brightness): two light sources with the same radiant energy but different wavelength yield a different luminous flux in lumens.
Consequence for LED display colour
Because an LED emits narrow-band around a dominant wavelength, LED primaries are highly saturated. Mixing red, green and blue (additive colour mixing) yields a wide colour range (gamut). The choice of the exact wavelengths of the R, G and B chips helps determine the size of that colour range and the white balance of the screen.